Automatic roasted packing machine how to carry out maintenance?


The full-automatic frying packaging machine produces and vibrates the material after production, and does not allow the material to be directly fed to the tray or blocked at the discharge port of the barrel. It is a type of object packaging used for packaging frying materials, puffed food, shrimp strips, peanuts, condiments and other particles or non-stick tray powder. Any machine needs regular maintenance. Everyone has reached a consensus. For the maintenance of fried packaging machines, suggestions:

Maintenance after 1. production:
After production every day, employees should clean the machine before leaving work. First, the barrel should be cleaned in the warehouse, the residual materials in the tray should be cleaned, and the residual materials in other parts should be cleaned to prepare for the next use.

Lubrication of 2. parts
1. The box body part of the machine is equipped with an oil meter. All oil should be added once before driving, and it can be added according to the temperature rise and operation of each bearing.
2. The worm gear box must store engine oil for a long time. The oil level is high enough for the worm gear to invade the oil. If it is used frequently, it must be replaced with new oil every three months. There is an oil plug at the bottom, which can be used for oil discharge.
3. When the machine is refueled, do not let the oil spill out of the cup, let alone flow around the machine and on the ground. Because the oil is easy to make the material pollution, affect the product quality.

3. maintenance instructions
1, regularly check the parts, once a month, check the worm gear, worm, lubrication block on the bolts, bearings and other parts of the flexible rotation and wear, found that defects should be repaired in a timely manner, not reluctantly used.
2. The machine should be used in a dry and clean room, and should not be used in places where the atmosphere contains acids and other corrosive gases to the body.
3. When the roller moves back and forth during work, please adjust the M10 screw on the front bearing pawn to the appropriate position. If the gear shaft moves, please adjust the M10 screw behind the bearing bracket to the appropriate position, adjust the clearance so that the bearing does not make noise, and rotate the pulley properly. Too tight or too loose can cause damage to the machine.
4. If the machine is stopped for a long time, the whole body of the machine must be wiped clean. The smooth surface of the machine parts shall be coated with anti-rust oil and covered with cloth.
The machine needs to be maintained, and the operator should use the machine correctly and clean it regularly during use.

Related News


Can tea machinery and equipment improve tea production and processing efficiency?

The yield and quality of tea is very important for the development of tea industry. There are some problems in the traditional tea processing methods, such as high labor intensity, long processing cycle and cumbersome processing links. Therefore, the development of tea machinery and equipment is of great significance to improve tea production and processing efficiency. Tea machinery and equipment can improve the efficiency of tea planting and picking. Traditional tea planting and picking methods require a lot of manpower input, and the use of tea machinery and equipment can greatly reduce the labor intensity of farmers. For example, the tea tree pruning machine can automatically complete the work of pruning tea trees, which not only improves the accuracy and efficiency of pruning, but also saves human resources. Similarly, the tea picker can pick tea quickly, and one person operating a machine is equivalent to the labor of dozens of people in traditional tea picking. This not only improves the efficiency of tea picking, but also reduces the breakage rate of tea leaves due to manual picking.


Can tea machinery and equipment improve tea production and processing efficiency?

The yield and quality of tea is very important for the development of tea industry. There are some problems in the traditional tea processing methods, such as high labor intensity, long processing cycle and cumbersome processing links. Therefore, the development of tea machinery and equipment is of great significance to improve tea production and processing efficiency. Tea machinery and equipment can improve the efficiency of tea planting and picking. Traditional tea planting and picking methods require a lot of manpower input, and the use of tea machinery and equipment can greatly reduce the labor intensity of farmers. For example, the tea tree pruning machine can automatically complete the work of pruning tea trees, which not only improves the accuracy and efficiency of pruning, but also saves human resources. Similarly, the tea picker can pick tea quickly, and one person operating a machine is equivalent to the labor of dozens of people in traditional tea picking. This not only improves the efficiency of tea picking, but also reduces the breakage rate of tea leaves due to manual picking.


Can the tea rationator realize intelligent control and remote control?

Tea processing machine is a kind of automatic equipment for processing tea, through a series of physical and mechanical operations, the picked tea curling, fermentation and drying process. In recent years, with the rapid development of artificial intelligence and remote control technology, the tea planner has also been intelligently and remotely controlled, providing a convenient solution for tea processing. Intelligent control is the basis for the automatic operation of the tea slatting machine. Through intelligent equipment such as sensors, Internet of Things technology and image recognition technology, the tea planner can sense important parameters of tea in real time, such as humidity, temperature, pressure, etc,


How to avoid the failure of the tea fixing machine

Any machine and equipment may have problems, so we must pay attention to its maintenance. The same is true for the tea killing machine. After all, it is a machine. We must control its daily operation state so that we can know whether the machine is abnormal. If there is any work, it is essential to carry out the regular maintenance of the tea killing machine immediately, otherwise it may break down and cause industrial production to stagnate, this is a situation we don't want to see, so regular inspections are also to prevent failures. Even if there are no problems, they should be checked to ensure the normal operation of the machine.


Automatic roasted packing machine how to carry out maintenance?

After production every day, employees should clean the machine before leaving work. First, the barrel should be cleaned in the warehouse, the residual materials in the tray should be cleaned, and the residual materials in other parts should be cleaned to prepare for the next use.


Basic production and packaging process of green tea

Green tea is one of the unique tea categories in China. It is a non-fermented tea. It is a product made of tea sprouts as raw materials, without fermentation, through typical processes such as fixing, rolling and drying. The quality characteristics of green tea are "three greens" (appearance green, soup color green, leaf bottom green), high fragrance, fresh taste, clear soup green leaves are the common characteristics of green tea quality.