新闻中心

News

Approximate fitting and NC machining of ellipse gear

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-06-23
  • Views:0

(Summary description)Oval gears are widely used in automatic machinery and instrument industries, and are a type of non-circular gears. If strictly required, the elliptical gear can only be manufactured correctly on the CNC gear shaper but the CNC gear shaper is very rare. In the case of small batches, the elliptical gear is fitted with 4 arcs, and then the elliptical gear is fitted on a common CNC machine tool. Processing can meet the general accuracy requirements, which is also an emergency measure to solve the problem.

Approximate fitting and NC machining of ellipse gear

(Summary description)Oval gears are widely used in automatic machinery and instrument industries, and are a type of non-circular gears. If strictly required, the elliptical gear can only be manufactured correctly on the CNC gear shaper but the CNC gear shaper is very rare. In the case of small batches, the elliptical gear is fitted with 4 arcs, and then the elliptical gear is fitted on a common CNC machine tool. Processing can meet the general accuracy requirements, which is also an emergency measure to solve the problem.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-06-23
  • Views:0

Oval gears are widely used in automatic machinery and instrument industries, and are a type of non-circular gears. If strictly required, the elliptical gear can only be manufactured correctly on the CNC gear shaper but the CNC gear shaper is very rare. In the case of small batches, the elliptical gear is fitted with 4 arcs, and then the elliptical gear is fitted on a common CNC machine tool. Processing can meet the general accuracy requirements, which is also an emergency measure to solve the problem.

Calculation of the approximate arc of the elliptical gear pitch curve. Given the parameters of an elliptical gear: the number of teeth Z, the modulus m, the semi-major axis of the ellipse a and the semi-minor axis b of the ellipse. The number of teeth in the AE segment is 2, and there is 2 (m + called = Z as shown, then there are: simultaneous solution, so there is the coordinate of point A: according to the geometric relationship, the substitute arc on the ellipse can be obtained. For example, use 2 For the symmetrical arc AB-CD, AD-BC replace the elliptic pitch curve, and make each arc have a complete number of teeth. Under this condition, find the radius and center of the substitute arc, as well as the coordinates of point A and the radius of the AD segment. The coordinates of R1, R2 and circle center 1, 2 when the eccentricity is not large, the number of ellipse gear teeth Z and the ellipse arc length L have an approximate formula: round R1, R2 to integer multiples of 0.5, the center coordinates: AG and AF The corresponding central angle is: the strength, fracture toughness, impact ability of ceramic tools have been greatly improved, and due to its excellent chemical stability, thermal stability and good wear resistance, it can be more than hard Alloys with higher cutting speeds for cutting.Cubic boron nitride is the best tool material for high-speed cutting of hardened steel, chilled cast iron, titanium alloys and other materials. Polycrystalline diamond tools are high-speed cutting aluminum alloys, magnesium alloys, and silicon alloys. Ideal tool material for materials such as non-ferrous metals and non-metals

News

On

On the occasion of the New Year, I wish all the new and old customers a happy, happy and long career, good luck in the year of the pig!

On the occasion of the New Year, I wish all the new and old customers a happy, happy and long career, good luck in the year of the pig!
2019-02-01
CCMT2016

CCMT2016

China CNC Machine Tool Fair(CCMT)was initiated in Shanghai in 2000 and has been successfully held for 8 sessions, 5 were held in Shanghai, 1 in Beijing and 2 in Nanjing. For long-term development and providing a larger platform to exhibitors, CCMT move back to Shanghai in 2014 and will be fixed in Shanghai forever. Based in South China,CCMT echoes with CIMT in North China,and will provide more vast space to exhibitors from both home and abroad.CCMT is the sister show of CIMT which is the most authoritative machine tool show in China,and now it plays more and more strong influence on the machine tool industry and its users.
2018-08-16
The

The characteristics of nc tool compared with ordinary machine tools

CIMT2017 will be held at the New International Exhibition Center in Beijing, China from April 17-22. The China International Machine Tool Show (CIMT) was founded in 1989 by the China Machine Tool Industry Association. It is held every single year. It is the most prestigious international machine tool exhibition in China.
2018-08-16
Simple

Simple troubleshooting CNC tools

As a result of the CNC tool machine tool transmission chain mostly adopts rolling friction pair, so the fault mostly cause for the quality decline of movement.
2018-08-16

Zhejiang Yinqiu Machinery Co., Ltd.

The only thing we can give back to our valued customers is to do our best

Zhejiang Yinqiu Machinery Co., Ltd.
TOP

Zhejiang Yinqiu Machinery Co., Ltd. 

We are a comprehensive technology-based enterprise covering intelligent equipment manufacturing and machine tool precision tools.

Contact us

Address: 1 hongqi road, xinchang industrial park, xinchang county, zhejiang province
Machine tool accessories:
0575-86590918
Mobile phone:15215987912Mr wu   15167531088Mr liu
Intelligent tea making machine:
0575-86097099 
Mobile phone:
13506752882Mr zhao   18957565808Mr zhou
Fax:
0575-86590918
QQ: 2818242396
E-mail:
info@yqzentax.com

搜索
Search

© 2021 Zhejiang Yinqiu Machinery Co., Ltd.   |   浙ICP备06013885号-2   |    Powered by www.300.cn 

Zhejiang Yinqiu Machinery Co., Ltd.